Photo Gallery
How to Connect a 4.5Kg Butane Cylinder
Published: 07/17/2008 by Amin
This cylinder takes a regulator that screws on to the valve outlet. Both have a connecting nut that incorporates a black sealing washer. 1. Check that the valve handwheel is off by turning clockwise 2. Remove protective black cap and retain for future use. 3. Inspect the black sealing washer on the regulator for damage before connecting. Replace the washer if faulty. 4. Fit the connecting nut (left hand thread) to the cylinder using a suitable spanner. Tighten firmly, but do not over-tighten as this can damage the washer. 5. When gas is required, turn the valve handwheel anticlockwise. Done!
Advertisers Do you want to advertise with us?